*New LED Light* UP 1475 LRS51 Local - Moffat Blvd. Railroad Crossing Manteca, CA
May 3, 2023 12:42pm After leaving Riverbank, I overheard this train coming to work the spur off the Calla Siding which I expected as I made it out on a weekday and was lucky enough to make it here to Moffat Blvd as I haven't filmed this crossing since the first time I did almost three years ago. A year ago, one Electro-Tech LED on the left light was replaced with a used Miller Felpax "WCH 2nd Gen LED" light which looks to be the only change here since I last filmed here. I also got an approaching viee of the train as it was coming across Industrial Park Dr on the Fresno Sub with my Sony Cybershot RX10 IV. Union Pacific Railroad LRS51 Local freight train passes through the Moffat Boulevard railroad crossing coming off the UP Fresno Sub onto a UP Spur Line headed to the run-around track in the back to go work Ford Parts Distribution Center in Manteca, California. UP 1475 GP40M-2, UP 1090 GP60 - LRS51-03 Crossing Info Manteca, CA This crossing owned by Union Pacific Railroad is a horn zone and bells ring through whole activation. Right Signal Cantilever: Harmon Lights: Five 12 inch Electro-Tech LEDs & One 12 inch Miller Felpax LEDs "WCH 2nd Gen" retrofitted in Three pairs of 12x24 inch Harmon Lights Junction Boxes: Harmon - Gated Mast Bell: WCH E-Bell "Type 2" Lights: One pair of 12 inch WCH 1st Generation LEDs retrofitted in One pair of 12x24 inch WCH Lights Junction Box: WRRS Logo WCH Gate Lights: NEG Gate LEDs "Alstom-Aurora Style" Mechanism/Counterweight Arms: WCH Base: WCH Install: UP Early 2000s, Installed between 2001 - 2003 Left Signal Cantilever: Harmon Lights: Three pairs of 12 inch Harmon Dotted LEDs retrofitted in Three pairs of 12x24 inch Harmon Lights Junction Boxes: Harmon - Gated Mast Bell: WCH E-Bell "Type 2" Lights: One pair of 12 inch WCH 1st Generation LEDs retrofitted in One pair of 12x24 inch WCH Lights Junction Box: WRRS Logo WCH Gate Lights: NEG Gate LEDs "Alstom-Aurora Style" Mechanism/Counterweight Arms: WCH Base: WCH Install: UP Early 2000s, Installed between 2001 - 2003 This crossing owned and maintained by Union Pacific Railroad is an UP Early 2000s signal install with its gates, gate lights, and some lights changed. Camera Sony Cybershot RX10 IV Sony Handycam FDR-AX53
May 3, 2023 12:42pm After leaving Riverbank, I overheard this train coming to work the spur off the Calla Siding which I expected as I made it out on a weekday and was lucky enough to make it here to Moffat Blvd as I haven't filmed this crossing since the first time I did almost three years ago. A year ago, one Electro-Tech LED on the left light was replaced with a used Miller Felpax "WCH 2nd Gen LED" light which looks to be the only change here since I last filmed here. I also got an approaching viee of the train as it was coming across Industrial Park Dr on the Fresno Sub with my Sony Cybershot RX10 IV. Union Pacific Railroad LRS51 Local freight train passes through the Moffat Boulevard railroad crossing coming off the UP Fresno Sub onto a UP Spur Line headed to the run-around track in the back to go work Ford Parts Distribution Center in Manteca, California. UP 1475 GP40M-2, UP 1090 GP60 - LRS51-03 Crossing Info Manteca, CA This crossing owned by Union Pacific Railroad is a horn zone and bells ring through whole activation. Right Signal Cantilever: Harmon Lights: Five 12 inch Electro-Tech LEDs & One 12 inch Miller Felpax LEDs "WCH 2nd Gen" retrofitted in Three pairs of 12x24 inch Harmon Lights Junction Boxes: Harmon - Gated Mast Bell: WCH E-Bell "Type 2" Lights: One pair of 12 inch WCH 1st Generation LEDs retrofitted in One pair of 12x24 inch WCH Lights Junction Box: WRRS Logo WCH Gate Lights: NEG Gate LEDs "Alstom-Aurora Style" Mechanism/Counterweight Arms: WCH Base: WCH Install: UP Early 2000s, Installed between 2001 - 2003 Left Signal Cantilever: Harmon Lights: Three pairs of 12 inch Harmon Dotted LEDs retrofitted in Three pairs of 12x24 inch Harmon Lights Junction Boxes: Harmon - Gated Mast Bell: WCH E-Bell "Type 2" Lights: One pair of 12 inch WCH 1st Generation LEDs retrofitted in One pair of 12x24 inch WCH Lights Junction Box: WRRS Logo WCH Gate Lights: NEG Gate LEDs "Alstom-Aurora Style" Mechanism/Counterweight Arms: WCH Base: WCH Install: UP Early 2000s, Installed between 2001 - 2003 This crossing owned and maintained by Union Pacific Railroad is an UP Early 2000s signal install with its gates, gate lights, and some lights changed. Camera Sony Cybershot RX10 IV Sony Handycam FDR-AX53